UQK series floating ball liquid level controller

1, introduction

UQK series float ball liquid level controller is suitable for the control of liquid level in the process of industrial production and pressure vessel. When the liquid level is in high or low limit, the switch operation sends out the alarm signal or the control pump, the valve opening and closing.

2, structure principle

Float ball liquid level controller is composed of two measurement parts and output parts. When the measured liquid level changes, the floating ball change, so that the end of the magnet, swing.

According to the magnetic repulsion principle, installed in the shell magnet swing back and forth, the moving contact in the static contact 3-1 and 3-2 is switched on or off.

3, technical parameters

Working pressure: 1.6MPa standard, 4.0MPa special type.

Working temperature: - 40 ~350 C

Medium density:0.65g/cm3

Contact capacity:3AAC220V

Material: 1Cr18Ni9Ti, ZL104, explosion-proof case, paint spraying.

Flange: PN4.0 DN80 (Ex) UQK-03 (owned by the user head flange JB82-59 or HG20594-97

Outlet port: M20 * 1.5 (internal thread)

Explosion proof mark: D BT4 II Ex

4, ordering information

Please specify the measurement medium, temperature, pressure, density, installation method when ordering.