UHZ magnetic float level gauge, the buoyancy and the principle of magnetic coupling, linear the change of liquid level to transfer to the indicator, and clearly indicate the liquid level height. The indicator and tank are completely isolated, so the absolute guarantee of safe use. The liquid level meter can be equipped with liquid level alarm switch and a reed switch type liquid level transmitter. Level alarm switch can realize liquid level control, limit alarm and interlock; remote liquid level transmitter can be the linear variation of the liquid level is converted into DC output 4 ~ 20mA, the distance of the liquid level indicator, detection, control and record. Mainly used in petroleum, chemical, chemical fertilizer, pharmaceutical, power plant, paper mills, smelting plants, ships and boilers and other industries.

2, the main technical parameters

Ordinary type

Measurement range: 0 to12 m

Display accuracy: +10mm

Working pressure: 2.5 4 6.4 16.0MPa 10

Medium density:0.45g/cm = fand

Medium density difference:0.15g/m = fand

Medium temperature: -80 ~ 200

Medium viscosity: less than 150cP

Wetted material: 1Cr18Ni9Ti, SUS304, SUS316, Ti, PVC, etc.

Flange: PN = 2.5MPa DN20 JB/T81-94 = 2.5MPa DN20 JB/T82.2-94 PN (required by users)

Sewage take over: 1/2 G"(inside)

Insulation jacket joint: ZG1/2 "(outside)

Alarm switch

Contact capacity:0.4AAC220V

Output form: normally open or normally closed

Electrical life: > 105 times

Maximum load current:1A

Maximum contact resistance:150m

Transmitter

Precision:10mm

Output signal: 4 ~ DC - 20mA

Load resistance: 500 (in 24VDC)

Power supply: DC24V

Ambient temperature: -40 ~ 60

Outlet port: M20 x 1.5 (inner)

Explosion proof type: Exd BT4

3, ordering information:

Please specify specifications and models.

Medium density and name

Connecting flange diameter, pressure and implementation standard.

Wetted material.

Indicate to other types of magnetic float level gauge structure when ordering please.