Application of acoustic wave cleaner in the die of sintering machine
Diaphragm type sound wave cleaning machine is the most widely used and practical dust remover in the sintering machine die.
General cleaning device installed on the top of SFQ-75, an installation of SFQ-100G\SFQ-160 combined use.
Principle of diaphragm type acoustic wave filter
Diaphragm type acoustic wave ash cleaning with compressed air as the sound waves of energy, high strength titanium l diaphragm in the compressed air source under the action of the self-excited oscillation, and in the resonant cavity resonance, the compressed air energy is converted into low frequency acoustic energy through air medium the acoustic energy is delivered to the corresponding dust, the sound wave of ash to "sound induced fatigue", due to acoustic oscillations repeatedly applied in ash and slag extrusion cycle change of load, reaches a certain cycle of stress frequency, ash, slag structure due to fatigue and damage, and then because of gravity, or due to the fluid medium, the ash and slag removal from the attachment surface, to achieve the cleaning effect.
Characteristic:
(1) the effective range is large, and the ash does not stay dead.
(2) the advanced equipment structure, investment is small.
(3) the operation and maintenance costs are low.
(4) the effect of cleaning dust is reliable, the operation is simple, the use is convenient, the user can be combined with the actual use of the situation, and the operation mode is determined.
(5) no harm to the health and safety of the equipment and human health.
(6) compact structure, easy installation, low failure rate, low maintenance.
(7) adapted to temperature. The room temperature and the high temperature of the boiler can be used.
(8) a wide range of application.